雑談しよう♪

If you've not install ESXi...... Download VIB for Realtek NIC Integrade VIB to ESXi Image use ESXi-Customizer . Install ESXi from the new ESXi image If you've installed ESXi...... Download VIB for Realtek NIC Upload VIB to your ESXi datastore Enable SSH service on your ESXi Use this command to install the VIB esxcli software vib install -v /vmfs/volumes/datastore1/VMware_bootbank_net-r8169_6.011.00-2vmw.510.0.0.799733.vib Reboot your ESXi host Download VIB for Realtek NIC: VMware_bootbank_net-r8168_8.013.00-3vmw.510.0.0.799733 VMware_bootbank_net-r8169_6.011.00-2vmw.510.0.0.799733

延伸Vol_Group的空間 先於VMware延伸vmdk的大小之後，Power On。 進入CentOS後： 利用fdisk將先前所延伸出來的空間做成ext4 Linux LVM (8e) pvcreate /dev/sda3 pvscan pvdisplay vgextend VGNAME /dev/sda3 ，記錄Free PE的數值 lvdisplay，記錄需要擴充的Logical Volume lvresize -l +3918 /dev/VolGroup/lv_root lvdisplay df -h，此時已經擴充完畢，接上來要通知FileSystem resize2fs /dev/VolGroup/lv_root df -h

NIC eth0 is gone Solution: 刪除/etc/udev/rules.d/70-persistent-net.rules後重新開機 # cd /etc/udev/rules.d # cp 70-persistent-net.rules /root/ # rm 70-persistent-net.rules # reboot Configure NIC onboot Update your /etc/sysconfig/networking-scripts/ifcfg-eth0 with eth1 HWaddr (MAC address), enter: # cat /etc/sysconfig/networking-scripts/ifcfg-eth0 Sample outputs: # DEVICE="eth0" # BOOTPROTO="dhcp" # NM_CONTROLLED="yes" # ONBOOT="yes" # HWADDR="00:0C:29:69:0C:4A" Save and close the file. Restart the network service, enter: # service network restart You can verify new settings with the following commands: # ifconfig -a # route -n Change keyboard layout Change keyboard layout to English keyboard # loadkeys us Change default keyboard layout to English keyboard # vi /etc/sysconfig/keyboard // need root permission // vi text editor # KEYTABLE="us" # KEYBOARDTYPE="pc" // type "ESC...